top of page

Designed to be quickly and easily assembled in areas with difficult access and its elasticity and flexibility to withstand great wave loads. An economic solution, reliable and tested in the most difficult marine conditions.


AQUAPLAST MODULAR dock system is made of high density polyethylene pipes assembled in a special designed bracket, entirely made by our company. The brackets not only support and hold together the pipes creating the main structure but also contribute to the buoyance of the floating dock. The basic pipes of the construction act as floats and they are filled with 20 kg/m3 of expanded polystyrene making a virtually unsinkable floating system


Τhe materials we use are environmentally friendly, fully recyclable and resistant to corrosion under marine conditions.

The deck is made of exotic timber boards, fixed with stainless steel bolts and screws.

The lateral fender is made of strong elastomeric material.

All parts of the anchorage systems are made of stainless steel, hot-dip galvanized and can easily be removed and replaced in case of damage.

In the lateral pipes, we place the water and fuel supply and the power cables.

  1. HDPE pipes of 315mm diameter filled with expanded polystyrene

  2. Anchorage system made of hot-dip galvanized steel.

  3. Brackets made by linear polyethylene.

  4. HPDE pipes of 110 mm diameter

  5. Elastomeric fender

  6. Deck made of exotic timber board

  7. Marine cleats.

The standard width of the floating dock is 2.5 m while its length can change according to customer’s requirements.

Aquaplast Modular Especials

On request, we can manufacture floating constructions engineering specifically to the site and the customer’s needs of any size and shape. The floating dock AquaPlast Modular can be manufactured with a built-in ramp made of the same materials.

PHONE  +30 22610 43771      |     FAX  +30 22610 43772     |     EMAIL

bottom of page